Mezzbarriers Modular Construction Pallet Gates and Personnel Safety Gates

  • MEZZBARRIERS Pallet Gates are constructed using Interclamp© tube clamps
  • Most models can be linked directly to new handrails and existing railing systems.
  • This system allows, in the event of the pallet gate being damaged from a forklift or general use, the individual fittings can be easily replaced.
  • Gates are supplied with main sections pre-assembled for a quick installation.
  • Gates supplied in all galvanised finish or with safety yellow thermoplastic coated (Warm to touch) tubes.

Compliance

MEZZBARRIERS Pallet Gates are fully tested and compliant with the requirements of BS EN ISO 14122-3:2016 and meet the safety requirements of the HSE and other safety professionals. For more information, please see Pallet Gates product pages below or for more information view MEZZBARRIERS Case Studies

One size does not suit all applications!

8 Different pallet gate models in a range of standard and bespoke sizes to suit most applications on mezzanine floors, platforms, loading docks, and high-level door openings.

Sigma Multi-Purpose Safety Pallet Gate

Key Features

- Meets HSE and Safety professional's requirements for site safety.

 

- Conformance with BS EN ISO 14122-3:2016

 

- Meets the Safe use of lifting equipment Lifting Operations and Lifting Equipment Regulations 1998 Approved Code of Practice and guidance L113 

Regulation 6(2) requires employers to ensure people cannot fall down shafts or hoistways.

 
- Pargraph180 Suitable and substantial gates, or other equally effective means, should be provided at any access and/or egress points to any hoistway or shaft enclosure.


- Paragraph 181 Any such gate, or other equally effective means, should be fitted with efficient interlocking or other devices, such that (a) the gate cannot be opened except when the lifting equipment is at the landing and (b) the lifting equipment cannot be moved away from the landing until the gate is closed.

 

-The Sigma Pallet Gate maintains a barrier between personnel and the exposed floor edge during the loading procedure and at all other times.

 

- Custom sizes for high loads up to 2250 mm within low headroom.

 

- Bespoke versions with inside width up to 3.0 metres x inside depth up to 2.0 metres.

Plus additional features

- Multi-purpose design - For mezzanines, process platforms, doorways and more
- Easy to install with installation and operating instructions provided
- Separates personnel from moving loads and falls from an unprotected edge.
- Operates without protruding over the floor edge.
- Galvanised or Safety yellow thermoplastic coated tube
- All parts are replaceable - CE marked.

Special non-standard applications

- Modifications for openings with inward opening doors of roller shutters (Click here for the questionnaire PDF)
- loading and unloading by an overhead hoist in addition to standard forklift loading.
- Raked forward inner gate to allow vacuum crane to reach all parts of the pallet.

 To view more or request a quotation CLICK HERE