Cable System / Power Supply - all single beam types - 2509998 - Schilling - By Brand
Cable System / Power Supply - all single beam types - 2509998
Key Features
- For mobile gantries all single beam types
- Crane is delivered ready-to-use including all connectors.
- Power supply 400 V / 16 Amp. 50 Hz, 5-pole with switch (standard version).
- PUR-Spiral cable - The electrical connection for the chain hoist is made using a plug and socket connection, 6-pole. (Protection class DIN EN 60 529 IP66).
- All electrical components are appropriate for internal and external operating conditions.
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Cable System / Power Supply - For mobile gantries all single beam types - 2509999
- The Aluminium Gantry Crane is delivered ready-to-use including all connectors.
- incl. test protocol of electrical devices according to DIN VDE 0701/0702, BetrSichV, BGV A 3 (issued by our Electrical-Master-Company)
- Power supply 400 V / 16 Amp. 50 Hz, 5-pole with switch (standard version).
- Phase inverter CEE-connector, 5-pole.
- PUR-Spiral cable.
- The electrical connection for the chain hoist is made using a plug and socket connection, 6-pole. (Protection class DIN EN 60 529 IP66).
- All electrical components are appropriate for internal and external operating conditions.
Attention:
While using the electrified Aluminium Gantry Crane in external condition it is important to ensure that it is connected to an electric circuit with an appropriate ground-fault-circuit-interrupter.
Please also make sure that there is no water ingress at the electrical components while the Crane is not in use (risk of corrosion/functional disorders).
See PDF for more information