CROSBY G2150 - BOLT TYPE CHAIN ( SAFETY D ) SHACKLES - Lifting Shackles - Lifting, Hoisting and Winching
CROSBY G2150 - BOLT TYPE CHAIN ( SAFETY D ) SHACKLES
Key Features
- Capacities 1/2 thru 55 metric tonnes, grade 6.
- Working Load Limit and grade “6” permanently shown on every shackle
- Forged — Quenched and Tempered, with alloy bolts.
- Hot Dip galvanized with red painted pin
- Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
CROSBY G2150 - BOLT TYPE CHAIN ( SAFETY D ) SHACKLES
- Capacities 1/3 thru 55 metric tonnes.
- Working Load Limit permanently is shown on every shackle.
- Forged — Quenched and Tempered, with alloy pins.
- Hot Dip galvanised
- Fatigue rated (1/3t - 55t).
- Shackles 25t and larger are RFID EQUIPPED.
- Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Sizes 1/2t-25t meet the performance requirements of EN13889:2003.
- Shackles 55 metric tonnes and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at the time of order..
- Non-Destructive Tested
- Serialized Pin and Bow
- Material Certification (Chemical) Certification must be requested at the time of order.
- Look for the Red Pin® . . . the mark of genuine Crosby quality.
- Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes
|
Nominal Body Size (in.) |
Working |
Stock No. |
Weight |
Pin (in.) |
|
G-2150 |
||||
|
1/4 |
1/2 |
1019768 |
.13 |
.31 |
|
5/16 |
3/4 |
1019770 |
.23 |
.38 |
|
3/8 |
1 |
1019772 |
.33 |
.44 |
|
7/16 |
1-1/2 |
1019774 |
.49 |
.50 |
|
1/2 |
2 |
1019775 |
.75 |
.64 |
|
5/8 |
3-1/4 |
1019793 |
1.47 |
.77 |
|
3/4 |
4-3/4 |
1019819 |
2.52 |
.89 |
|
7/8 |
6-1/2 |
1019837 |
3.85 |
1.02 |
|
1 |
8-1/2 |
1019855 |
5.55 |
1.15 |
|
1-1/8 |
9-1/2 |
1019873 |
7.60 |
1.25 |
|
1-1/4 |
12 |
1019891 |
10.81 |
1.40 |
|
1-3/8 |
13-1/2 |
1019917 |
13.75 |
1.53 |
|
1-1/2 |
17 |
1019935 |
18.50 |
1.66 |
|
1-3/4 |
25 |
1019953 |
31.40 |
2.04 |
|
2 |
35 |
1019971 |
46.75 |
2.30 |
|
2-1/2 |
55 |
1019999 |
85.00 |
2.80 |