CROSBY IPU10/H VERTICAL PLATE LIFTING CLAMP (For use on materials with a surfacehardness to 47Rc (450 HB) and fitted with a hinged hoisting eye). - Crosby - By Brand
CROSBY IPU10/H VERTICAL PLATE LIFTING CLAMP (For use on materials with a surfacehardness to 47Rc (450 HB) and fitted with a hinged hoisting eye).
Key Features
- For vertical Lifting, Turning and Transfer
- Available in capacities of .0.5 thru 6.0 metric tonnes
- Wide variety of jaw openings available: 0 to 50mm | 0” - 2.”.
- For very hard materials - with universal hoisting eye
- Welded alloy steel body for strength and smaller size. Forged alloy components, where required
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
CROSBY IPU10/H LIFTING CLAMP
IPU10H vertical lifting clamps are suitable for the lifting,turning (180°) and vertical transfer of steel plates and sections with extra hard surface hardness.
For use on materials with a surfacehardness to 47Rc (450 HB).Fitted with a pivot and a camsegment made of extra hard wear-resistant material.
Model IPU10H: fitted with a hinged hoisting eye.
FOR HARD SURFACE MATERIALS
- Available in capacities of 0,5 thru 6 metric tonnes. (Higher WLL and jaw openings are available upon request).
- Wide variety of jaw openings available: 0 to 50mm | 0” - 2.”.
- Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
- Full 180° turning range for material transfer, turning or moving.
- Lock open, lock closed ability with latch for pretension on material and then release of material.
- Minimum WLL of 10% of Maximum WLL.
- Maintenance replacement kits are available
- Manufactured by a ISO 9001 facility.
- All sizes are RFID EQUIPPED.
|
model |
stock no. |
WLL |
Weight |
Jaw a |
b |
C |
D |
E |
f |
g |
H |
J |
K |
|
0,5 IPU10H |
2702175 |
0,5 |
1,9 |
0-16 |
44 |
128 |
228 |
40 |
115 |
41 |
28 |
- |
11 |
|
1 IPU10H |
2702177 |
1,0 |
7,6 |
0-35 |
78 |
201 |
372 |
70 |
190 |
61 |
55 |
- |
16 |
|
2 IPU10H |
2702165 |
2,0 |
14,8 |
0-40 |
100 |
253 |
445 |
75 |
225 |
78 |
60 |
- |
20 |
|
3 IPU10H |
2702167 |
3,0 |
16,0 |
0-40 |
100 |
253 |
445 |
75 |
232 |
82 |
65 |
- |
20 |
|
4,5 IPU10H |
2702169 |
4,5 |
24,0 |
0-50 |
126 |
302 |
525 |
80 |
292 |
84 |
95 |
44 |
20 |
|
6 IPU10H |
2702171 |
6,0 |
29,5 |
0-50 |
126 |
325 |
557 |
80 |
310 |
92 |
105 |
44 |
20 |
Design Factor based on EN 13155 and ASME B30.20.
