CROSBY IPU10/W VERTICAL PLATE LIFTING CLAMP (Equiped with wedge for plate separation and hinged lifting eye) - Metal Industries - By Industry
CROSBY IPU10/W VERTICAL PLATE LIFTING CLAMP (Equiped with wedge for plate separation and hinged lifting eye)
Key Features
- IPU10W clamp features a wedge extension to assist in separating plates
- Jaw gaps from 0 - 50 mm
- Lifting capacities fro 0.5 to 3.0 tonnes
- Universal hoisting eye
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
CROSBY IPU10/W LIFTING CLAMP
Equiped with wedge and universal lifting eye
The IP10W vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines. The "W" model of the clamp features a wedge for separating plates.
| Stock No | Model | Workinh load Limit (tonnes) |
Jaw (mm) |
Weigt (Kg) |
| 2702375 | 0,5 IPU10W | 0.5 | 0-16 | 1.9 |
| 2702363 | 1 IPU10W | 1.0 | 0-20 | 2.0 |
| 2702377 | 2 IPU10W | 2.0 | 0-35 | 7.6 |
| 2702365 | 3 IPU10W | 3.0 | 0-40 | 14.8 |