Crosby L322AN - 1048898 - Alloy Swivel Eye Hook 31.5T WLL - Crosby - By Brand
Crosby L322AN - 1048898 - Alloy Swivel Eye Hook 31.5T WLL
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
- Forged - Quenched and Tempered.
- Swivel hooks are load rated.
- Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
- Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies listed and shown on pages 121 - 122. Even years after purchase of the original hook, latch assemblies can be added.
- Hoist hooks incorporate markings forged into the product which address two (2)
QUIC-CHECK® features:
- Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload.
- Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
- Type Approval certification in accordance with ABS 2007 Steel Vessel Rules
1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
L-322 AN Swivel Hooks
|
Working Load Limit (t)* |
L-322 AN Stock No. |
Weight Each (lbs.) |
Dimensions (in.) |
Rep. Latch Stock No. |
||||||||||||||
|
Alloy |
A |
B |
C |
D |
F |
G |
H |
J |
K |
L |
M |
O † |
R |
S |
AA** |
|||
|
31.5 |
1048898 |
70.50 |
7.10 |
3.76 |
4.10 |
13.62 |
5.00 |
3.61 |
4.63 |
4.00 |
3.00 |
23.25 |
3.00 |
3.25 |
18.01 |
1.50 |
6.50 |
1093716 |
* Alloy swivel hook 31.5tA: proof load is 2 times working load limit. Designed with a 4 to 1 design factor. ** Deformation Indicators. † Dimensions for hooks 31.5 ton alloy are for PL latch kit.