Crosby Wedge Socket S-421T - Crosby - By Brand
Crosby Wedge Socket S-421T
Key Features
- To suit wire ropes 8 to 32 mm dia
- 5:1 safety factor
- Eliminates the need for an extra piece of rope, and is easily installed.
- Generates a minimum efficiency of 80% based on the catalogue breaking strength of the wire rope.
- Material: Cast Steel - Marking: According to standard, ID code and Manufacturer's symbol - Finish: Painted.
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Crosby
Wedge Socket Crosby S-421T
Features:
- Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punchout” of the wedge.
- Eliminates the need for an extra piece of rope, and is easily installed.
- The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue.
- The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse.
- Incorporates Crosby’s patented QUIC-CHECK™ “Go” and “No-Go” feature cast into the wedge.
- Utilises standard Crosby Red-U-Bolt wire rope clip.
- It generates a minimum efficiency of 80% based on the catalogue breaking strength of the wire rope.
- Pin diameter and jaw opening allow wedge and socket to be used in conjunction with open swage and spelter sockets.
Wedge sockets meet the performance requirements of Federal Specification RR-S-550F, Type C, except those provisions required of the contractor.
- Material: Cast Steel.
- Marking: According to standard, ID code, and Manufacturer's symbol.
- Finish: Painted.
- Standard: EN 13411-6
- Safety factor: 5:1
| Wire Rope Dia. | S-421T Stock No. |
Dimensions (mm) | |||||||||||||||
| (mm) | (in.) | A | B | C +/- 2.29 |
D | G | H | J* | K* | L | P | R | S | T | U | V | |
| 9-10 | 3/8 | 1035000 | 145 | 69.1 | 20.6 | 20.6 | 35.1 | 77.7 | 198 | 47.8 | 22.4 | 39.6 | 11.2 | 54.1 | 11.2 | 31.8 | 35.1 |
| 11-13 | 1/2 | 1035009 | 175 | 88.1 | 25.4 | 25.4 | 41.1 | 95.5 | 226 | 32 | 26.9 | 49.3 | 12.7 | 65 | 13.5 | 44.5 | 47.8 |
| 14-16 | 5/8 | 1035018 | 210 | 109 | 31.8 | 30.2 | 53.8 | 114 | 273 | 50.5 | 31.0 | 57.2 | 14.2 | 82.6 | 17.5 | 51.0 | 55.5 |
| 18-19 | 3/4 | 1035027 | 251 | 130 | 38.1 | 35.1 | 62 | 134 | 314 | 61.2 | 35.6 | 66.8 | 16.8 | 92.2 | 19.8 | 59.5 | 65 |
| 20-22 | 7./8 | 1035036 | 286 | 149 | 44.5 | 41.4 | 68.5 | 156 | 365 | 63 | 42.4 | 79.5 | 19.1 | 109 | 22.4 | 68.5 | 74.5 |
| 24-26 | 1 | 1035045 | 325 | 161 | 51.0 | 51.0 | 74.7 | 177 | 414 | 77.2 | 51.0 | 95.5 | 22.4 | 119 | 26.2 | 73 | 83.5 |
| 28 | 1-1/8 | 1035054 | 365 | 176 | 57.0 | 57.0 | 84 | 194 | 466 | 65 | 57.0 | 108 | 25.4 | 138 | 27.9 | 82.6 | 90.5 |
| 30-32 | 1-1/4 | 1035063 | 415 | 222 | 66.5 | 63.5 | 90.5 | 239 | 520 | 74.7 | 59.5 | 114 | 26.9 | 156 | 30.2 | 117 | 125 |
* Nominal NOTE: For intermediate wire rope sizes, use next larger size socket. The S-423T Super TERMINATOR wedge is designed to be assembled only into the Crosby S-421T TERMINATOR socket body.
IMPORTANT: The S-423TW for sizes 14mm to 28mm will fit respective size standard Crosby S-421T basket. The 30-32mm S-423TW will only fit the Crosby S-421T 30-32mm basket marked with TERMINATOR.