Eclipse Ultralift Plus Lifting Magnets - Eclipse Magnetics - By Brand
Eclipse Ultralift Plus Lifting Magnets
Key Features
- 5 models 125 kg to 2,000 kg
- Safety shim for pre-lift testing
- Operating handle is held by a safety catch to prevent accidental switching
- Patented mechanism prevents any switching, accidental or otherwise, of the Ultralift Plus while it is holding a load.
- No power is required and it has no operating cost
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Eclipse Ultralift Plus Lifting Magnets
With 5 sizes available, the Ultralift Plus lifting magnet is suitable for lifting a wide range of loads in the factory or workshop. It's capable of lifting both round and flat section loads.
The Ultralift Plus uses high power neodymium 'rare earth' magnet material for the highest power to weight ratio. The material is permanently magnetic, and switching the Ultralift Plus on and off is manual, so no power is required and it has no operating costs. You can use it almost anywhere - just hook it to your hoist or crane.
With a lifting magnet a load can be hoisted safely by just one man. And you'll have no more worries about the stability of a load once it's lifted (especially when it's been pre-tested to ensure a 3:1 safety factor with the 'Safety Shim'). Storage of handling of loads can be more efficient as you only need access to a load's top face.
3 important safety features for ultra-safe lifting
1. 'Safety Shim' (patented)
For pre-testing any load. Place the 'Safety Shim' on the load with the Ultralift Plus on top. Activate the Ultralift Plus and attempt to lift the load a very short distance. If the Ultralift Plus holds the load with the 'Safety Shim' then a 3:1 safety factor is guaranteed without it. The ability to pre-test any load could be especially useful if you lift loads of differing sizes, materials and surface finishes.
2. Safety catch
When the Ultralift Plus is 'on' the operating handle is held by a safety catch to prevent accidental switching. The safety switch is release by pressing a button on the end of the operating handle.
3. Lifting eye mechanism (patented)
Patented mechanism prevents any switching, accidental or otherwise, of the Ultralift Plus while it is holding a load.
| Product | Diametre Max (mm) | Length Max (round mm) | SWL (flat section) | SWL (round section) | Weight (kg) |
| UL0125+ | 200 | 1500 | 125 | 50 | 4 |
| UL0250+ | 300 | 1500 | 250 | 100 | 11 |
| UL0500+ | 400 | 2000 | 500 | 200 | 27 |
| UL1000+ | 450 | 3000 | 1000 | 400 | 63 |
| UL2000+ | 600 | 3000 | 2000 | 800 | 157 |