Ridgegear - RGH4 - Front, Rear and Side D Harness ( 4 Point ) - Safety Harnesses - Height Safety Equipment
Ridgegear - RGH4 - Front, Rear and Side D Harness ( 4 Point )
Key Features
- The RGH4 combines the basic fall arrest harness with a comfortable work positioning belt in one unit.
- The harness is fitted with a front and rear D and two side rings mounted to the belt. This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas.
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Specifications
| Accredited to: | EN 361 & EN 358 |
| Web Material: | 45mm water repellent polyester |
| Fittings: | High tensile steel alloy & st/steel |
| Weight: | 1.50 kg |
| Features: | Rear & side attachment points, rip stitch indicators, gear loops |
Product Info
The RGH3 combines the basic fall arrest harness with a comfortable work-positioning belt in one unit. The harness is fitted with a rear dee and two side dee rings mounted to the belt and can be used similar to the RGH1. When fitted with a pole/work-positioning belt (RGP1&2), the harness can be used for pole climbing or work-positioning on open structures. In certain circumstances, the side dee's on the RGH3, can be used for work restraint in the horizontal plane.
The wide belt fitted to the RGH3 is comfortable and provides lumbar support to the operative. The belt is also fitted with three gear loops for carrying tools leaving the hands free thus maintaining the required three points of contact when climbing.
The harness is fully adjustable and is fitted with rip stitch indicators.
BUY ONLINE NOW
The RGH4 combines the basic fall arrest harness with a comfortable work positioning belt in one unit. The harness is fitted with a front and rear D and two side rings mounted to the belt. This comfortable harness is designed for operatives who spend a lot of time
working at height and in exposed areas.
Front, rear and side attachment points
Work positioning belt
Two tool loops
Fold back side D rings
Accredited to: EN 361: 2002 &
EN 358: 2018
Web material: 45mm water repellent polyester
Weight: 1.75kg Standard buckles
1.95kg Fast fit buckles
Size Standard,