INVICTA LoadLifter Unit c/w Ladder - Base size 1900 x 1500 mm - Invicta Fork Lift Attachments - By Brand
INVICTA LoadLifter Unit c/w Ladder - Base size 1900 x 1500 mm
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Specifically designed for the safe loading and unloading of roll cages onto and from articulated vehicles.
| Model | Capacity | Base Size (mm) | Self Weight | C of G (mm) |
| Load Lifter | 1000 kg | 1900 x 1500 | 250 kg | 790 |
STANDARD FEATURES
- Lowerable ladder for safe access for personnel
- Rubber buffered wings to limit entry into the rear of the vehicle
- Retention rope to minimize cage movement
- Maximum fork section 100 x 45 mm at 1000 mm centres
- Painted bright orange for safety
OPTIONAL FEATURES
- Furniture or goods lifters can be manufactured to suit your own unique application (contact us)
OPERATION
- The product must be positioned on level ground.
- Position the forks to the correct distance apart to locate into fork pockets.
- Drive forks fully into fork pockets.
- Unlatch the safety chains and re-couple to keep the bracket.
- Load the load lifter with 2 or 3 cages (dependent upon cage type).
- Re-attach the safety chains.
- Lift the load lifter so the two retaining brackets (Yellow) fully engage with the forklift carriage.
- Apply the required back tilt of the forklift mast.
- Proceed to the open lorry approaching square on and not angular.
- Lift the Load lifter above the lorry bed height and proceed forward into the lorry so that the side handrails are within the sides of the lorry.
- Realign the forklift mast to the vertical position and lower it onto the lorry bed, ensuring the retaining brackets are still engaged to the carriage.
- Unlatch the safety chains and re-couple to keep the bracket and remove the cages
- Once empty, lift the Load lifter and reverse away for the next operation.