Thern 4WM2-CE 907 Kg with brake (for lifting) – enclosed gearing – drill driveable - Manual Drum Winches - Winches - Lifting, Hoisting and Winching
Thern 4WM2-CE 907 Kg with brake (for lifting) – enclosed gearing – drill driveable
Shipped direct from Manufacturer partner - Despatch generally 2 weeks - Prices ex works, for carriage and despatch request quotation to your address.
Key Features
- Machine Cut Worm Gears - For accurate operation and long lasting service.
- Hex drive and handle are included. 4WM2 can be power driven with a maximum 400 rpm drill-motor.
- Equipped with an internal mechanical brake that provides positive load control for lifting applications.
- Corrosion Resistant - Durable paint finish protects against corrosion in harsh environments.
- Mounting Options Include floor, wall, or ceiling. Adapter plate may be required, contact us
4WM2-CE 907 Kg with brake (for lifting) – enclosed gearing – drill driveable
QUICK FACTS
- Up to 907 kg capacity
- Machine-cut worm gears
- Automatic brake
- Mounting options
- Corrosion resistant
- Two-Year Limited Warranty
- Ropes sold separately
Machine-Cut Bronze Gears Bronze worm gears reduce noise, enhance precision, and extend service life while facilitating
drill-drivable operation
Flexible Operation Design - Operate winch using the adjustable handle or portable drill drive for longer lift applications that lack a permanent power supply. Drill drive operation* allows faster lifting/lowering speed (400 RPM Drive Maximum).
Enclosed Oil Bath - An oil bath provides continuous lubrication of gearbox components to minimize wear, extend life, and reduce maintenance
Large-Diameter Drum- Large diameter drum extends wire rope life and increases aluminium gear Box travel distance. Lightweight, corrosion-resistant design enhances portability and increases service life.
Worm Gear Hand Winches Performance Characteristics — Metric |
|||||||||||
|
Load Rating |
Drum Capacity1 |
||||||||||
|
Model No. |
Description |
1st Layer |
Mid Drum |
Full Drum |
Wire Rope Dia. |
1st Layer |
Mid Drum |
Full Drum |
Gear Ratio |
Force to Lift 1000 lb |
Approx. Ship Wt. |
|
(kg) |
(kg) |
(kg) |
(mm) |
(m) |
(m) |
(m) |
(kg) |
(kg) |
|||
|
4WM2-CE |
907 kg — enclosed gearing with brake (for lifting) – Drill Driveable |
907.1 |
680.3 |
544.3 |
6.3 |
3.3 |
10.6 |
23.4 |
32:1 |
6.3 |
18.5 |
Actual drum capacities may be 25-30% less, due to nonuniform winding. Wire rope tension will also affect drum capacity. 2 Approximate handle force required to lift an empty drum and maximum handle length.
Worm Gear Hand Winches — Metric Dimensions |
|||||||||||||||||
|
Model No. |
Drum Dia. |
Flange Dia. |
Drum Width |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
L |
M |
S (hole dia.) |
T |
|
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
|
|
4WM2 |
63.5 |
127 |
127 |
342.9 |
395.2 |
217.4 |
84.0 |
153.4 |
293.6 |
268.9 |
439.4 |
44.4 |
95.2 |
101.6 |
342.9 |
10.4 |
— |
IMPORTANT: It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.