Invicta Standard Multi-Use Scoop Type IMUS - Waste & Materials Handling and Recycling Skips and Bins - Material Handling
Invicta Standard Multi-Use Scoop Type IMUS
Key Features
- The skip can be easily positioned at the end of a conveyor, dross shoot or manufacturing line to collect bi-products that are below waist level.
- The forklift driver to tip the skip at high level without leaving the safety of his seat
- Secondary Locking Mechanism to prevent accidental discharge
- 4 way fork pocket entry
- 2 models available 300 kg and 600 kg
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Multi-Use Scoops are an ideal alternative to a loading shovel allowing your forklift to become a more universal asset. Ideal for the movement or loading of loose materials such as sand, gravel, topsoil or similar on to the rear of a collecting vehicle or into a Big Bulk Bag Hopper (see alternative specification sheet).
Standard Multi-Use Scoop Features
Secondary locking mechanism to prevent accidental dischargeRemovable toothed leading edge to cut into product and protect scoop lip4 way Fork Pocket EntryOperating mechanism fully enclosed to protect against impactMaximum fork section 150 x 50 mm at 675 mm centresZinc plated twist screws for safe attachment to truckPainted bright orange for safety
| Model | Nominal Capacity (m3) |
Capacity (kg) | Bucket Sizes (mm) | Weight (kg) | C of G (mm) | ||
| Length | Width | Height | |||||
| IMUS-1 | 0.40 | 400 | 1015 | 860 | 660 | 180 | 600 |
| IMUS-2 | 0.62 | 600 | 1015 | 1300 | 660 | 185 | 620 |