NCL - 64amp 4-pole Enclosed Conductor Bar systems - All Hoist Accessories - Hoists - Lifting, Hoisting and Winching
NCL - 64amp 4-pole Enclosed Conductor Bar systems
Key Features
- No hanging cables and therefore safer
- Unhindered travel length - no cable bunch up at feed end
- Ability to feed more than 2 machines at the same time
- No limit to the length of the system
- Very quick and easy to install - Can be fed from end or in-line
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
NCL - 64amp 4-pole Enclosed Conductor Bar system..
NCL Enclosed conductor bar supply system, supplied in kit form.
Kit includes:
Track, supplied in 4m lengths (as standard)
500mm adustable support brackets c/w girder clamps (one every 2m)
Sliding support clips with M8 bolt for fixing to brackets brackets (one every 2m)
1 x Fixed support clip to stop system from sliding
2 x end caps
1 x end feed gland or line feed length of track
1 x 40amp 4-pole collector
1 x Towing arm for collector
Technical details:
Support brackets clamp around top/bottom of I-beam section (152mm max flange width)
64amp maximum current rating
Internal copper conductors are suitable for up to 4-pole supply
PVC housing
Suitable for operating temperatures of -30° to 70°C
IP23 protection rating
2m between support brackets
Alternative lengths and bend sections are available upon request - Call for information
Advantages
- No hanging cables and therefore safer
- Unhindered travel length - no cable bunch up at feed end
- Ability to feed more than 2 machines at the same time
- No limit to the length of the system
- Very quick and easy to install
- Multiple bends with single system
- Can be fed from end or in-line
- Only power where needed by using funnel entry/exit system
Technical:
-
Housing material
PVC
Standard Lengths
4m
Number of conductors
4 – 7
Current ranges
64A,
Ambient / working temperature
-30°C to +70°C
Travel speed
Up to 300 m/min depending on application
Protection class
IP23 / IP24 (with sealing lip)
Smallest curve radius
≥ 800 mm horizontal / ≥ 1500 mm vertical
Fire protection equipment
UL94 / V0 (not halogen free)
Notes:
- An alternative system with aluminium casing is also available on request
- NCL is fully compatable with Demag DCL enclosed conductor bar system
