Free Advice talk to an expert now.
Request a Quote Available on all products

Pewag winner profilift lifting point PLAW Alpha - UNC Thread - Pewag ProfiLift Lifting Points - Pewag - By Brand

In stock
SKU
PLP-PLAW-UNC

Pewag winner profilift lifting point PLAW Alpha - UNC Thread

In stock
Quantity

Key Features

  • 360° rotatable lifting point. The load ring is loadable in a range of 130° and can be positioned at any required angle due to its replaceable and patented spring
  • UNC Threads 3/8" to 1/1/2"
  • pewag winner profilift alpha is able to withstand a 4-fold safety against break in all directions
  • peTAG data - Speedy direct access via smartphone or computer
Delivery Options

Delivery Information

Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.

Returns Policy

Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.

Non-standard (Quote only, pre-order or custom-made products)

Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.

For more information see https://www.dlhonline.co.uk/terms-conditions

PLAW Alpha - UNC Threads

pewag winner profilift lifting point PLAW Alpha.
Simply the best!

This lifting point is 360° rotatable. The load ring is loadable in a wide range and can be positioned at any required angle due to its replaceable and patented spring. The hexagonal special screw is also replaceable and secured against loss. The PLAW pewag winner profilift alpha screw is made from 10.9 grade material, 100% crack-tested, covered with a chromate VI-free protection agent against corrosion and marked with the load capacity and thread size.

pewag winner profilift alpha can withstand a 4-fold safety factor against breaks in all directions, and every single lifting point is marked with an individual serial number. pewag winner profilift alpha is available with metric or UNC-thread. The versions with metric thread are also available with customised thread lengths. All load capacities, categorised by type of application, the number of legs, and angle of inclination, are contained in a table that forms an integral part of the operating manual and is included with each lifting point.

Also available with peTAG data system upon request.

Product Description

Permitted usage
Please refer to the load capacity table for load capacities in the permitted pull directions.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • The direction of the pull is obstructed.
  • The direction of the pull is not within the indicated area.
  • Loading ring rests against edges or loads.

The load ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.

Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data

Method of lifting    
 
 
 
 
 
 
 
 
 
 
Number of legs     1 1 2 2 2 2 3+4 3+4 2 3+4
Angle of inclination     90° 90° 0‑45° 45‑60° 0‑45° 45‑60° asymm° asymm°
PLAW Alpha Code / Type thread fastening torque load capacity
[inch] [ft-lbs] [lbs]
  PLAW U 3/8 3/8"-16 52 1,400 1,400 2,800 2,800 1,960 1,400 2,940 2,100 1,400 1,400

PLAW Alpha

PLAW U 1/2 1/2"-13 89 2,200 2,200 4,400 4,400 3,000 2,200 4,600 3,300 2,200 2,200
  PLAW U 5/8 5/8"-11 110 3,300 3,300 6,600 6,600 4,600 3,300 6,800 4,800 3,300 3,300
  PLAW U 3/4 3/4"-10 125 5,500 5,500 11,000 11,000 7,790 5,500 11,600 8,260 5,500 5,500
  PLAW U 1 1"-8 295 8,800 8,800 17,600 17,600 12,300 8,800 18,400 13,200 8,800 8,800
  PLAW U 1 1/4 1 1/4"-7 369 13,200 13,200 26,400 26,400 18,700 13,200 27,800 19,800 13,200 13,200
  PLAW U 1 1/2 1 1/2"-6 590 17,600 17,600 35,200 35,200 24,900 17,600 37,400 26,400 17,600 17,600
  PLAW U 1 3/4 1 3/4"-5 740 22,000 22,000 44,000 44,000 30,000 22,000 45,000 33,000 22,000 22,000
  Safety factor 4
  Important: Subject to technical changes!

 

PLAW Alpha Code / Type thread
[inch]
load capacity
[lbs]
a
[inch]
b
[inch]
c
[inch]
d
[inch]
e
[inch]
g
[inch]
h
[inch]
k
[inch]
n
[inch]
n max
[inch]
Nut
[inch]
Spanner
[inch]
weight
[lbs/pc.]
 
 

 
 
PLAW U 3/8 3/8"-16 1,400 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 0.79 - 3/8" 15/16" 1.30
PLAW U 1/2 1/2"-13 2,200 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 1.30 - 3/8" 15/16" 1.32
PLAW U 5/8 5/8"-11 3,300 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 1.30 - 3/8" 15/16" 1.39
PLAW U 3/4 3/4"-10 5,500 2.13 3.19 1.97 0.51 2.17 4.41 1.97 2.64 1.30 - 3/8" 1 1/8" 6.60
PLAW U 1 1"-8 8,800 2.95 4.53 2.64 0.79 2.68 5.63 2.64 3.94 1.42 - 3/4" - 6.80
PLAW U 1 1/4 1 1/4"-7 13,200 2.95 4.53 2.64 0.79 2.68 5.63 2.64 3.94 1.93 - 7/8" - 13.70
PLAW U 1 1/2 1 1/2"-6 17,600 3.66 5.79 3.35 1.06 3.35 7.40 3.35 4.72 2.17 - 1 1/2" 3/4" 14.10
Write Your Own Review
You're reviewing:Pewag winner profilift lifting point PLAW Alpha - UNC Thread