Portable Lean Over Lifting Davit - GB Lifting Davits - Lifting Davits - Cranes
Portable Lean Over Lifting Davit
Key Features
- 500 kg and 1000 kg capacities
- Portable lifting davits for hoist suspension
- Galvanised steel to BS EN 1461 - 360 degree rotation
- Ideal for Water industry applications
- Choice of galvanised sockets
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Galvanised Lean Over Davit
The steel galvanised lean-over davit is a 3-piece design (sections below 25 kg) with a range of socket pin diameters (For special pin diameters, please contact us). It is manufactured from mild steel and galvanised to BS EN 1461.
This versatile, portable equipment is available in various specifications.
Designed as a transportable device, the steel lean-over davit is often used in locations where it can be stored on-site.
Fitted with a castellated offset suspension point, the chain block or hoist can be adjusted from the central point of the lift.
It also has a secondary lifting point for a slave suspension chain, index lifting pumps from wet wells, etc.
Alternative socket pin diameters can be manufactured as required to suit specific requirements (Contact us)
Subject to customer requirements, these davits can also be supplied in either stainless steel 304 or stainless steel 316 (Contact us)
Davit Dimensions
| Model | Capacity (kg) | Reach (A) mm | Height (B) to suspension point mm | Rotation (Degrees) | Pin Dia. Mm | Finish |
| LOD05750 | 500 | 750 | 1960 | 360 | 65 | Galvanised |
| LOD051000 | 500 | 1000 | 1960 | 360 | 65 | Galvanised |
| LOD051200 | 500 | 1200 | 1960 | 360 | 65 | Galvanised |
| LOD101070 | 1000 | 1070 | 2010 | 360 | 75 | Galvanised |
Socket options
| Socket Type | WLL (kg) | Base Dimensions (mm) |
To Fit Diameter Pin mm | Tota; depth required mm | No. Of Fixing Holes | Fixing Size | Finish |
| Surface Mount | 500 | 400 x 400 | 65 | NA | 4 | M20 | Galvanised |
| Surface Mount | 1000 | 500 x 500 | 75 | NA | 8 | M20 | Galvanised |
| The surface mount sockets are suitable for mounting on concrete or steel structures, and a cover plate can be supplied if required. | |||||||
| Cast In | 500 | 200 dia | 65 | 350 | NA | NA | Galvanised |
| Cast In | 1000 | 200 dia | 75 | 350 | NA | NA | Galvanised |
| Cast-in sockets are installed into concrete when a reduced-trip hazard installation is required. A cover plate is fitted as standard. | |||||||
| Grout In | 500 | 200 dia | 65 | 350 | NA | NA | Galvanised |
| Grout In | 1000 | 200 dia | 75 | 350 | NA | NA | Galvanised |
| Grout-in sockets without tabs for installations into existing concrete and is fixed in place with a chemical fixing compound. | |||||||
| Wall Mount | 500 | 450(H) x 400(W) | 65 | NA | 7 | M20 | Galvanised |
| Wall Mount | 1000 | 450(H) x 400(W) | 75 | NA | 7 | M20 | Galvanised |
|
Wall-mounted davit sockets are constructed using a mounting plate with holes to suit M20 fixings. These wall sockets can also be supplied with back-plates and compression tubes for use when mounting on a twin-skin cavity wall installation. |
|||||||
| Bridge Mount | 500 | 250 x 250 | 65 | 250 | 6 | M16 | Galvanised |
| Bridge Mount | 1000 | 250 x 250 | 75 | 250 | 6 | M16 | Galvanised |
|
Bridge-mounted davit sockets are Widely used in steel walkways where a flush installation is required to reduce trip hazards. This type of socket can also be flush-mounted within open mesh flooring sections. |
|||||||
| Inverted Mount | 500 | 400 x 400 | 65 | 312 | 8 | M20 | Galvanised |
| Inverted Mount | 1000 | 500 x 500 | 75 | 350 | 8 | M20 | Galvanised |
|
Inverted-mounted sockets are widely used in steel walkways where a flush installation is required to reduce trip hazards. This type of socket can also be flush-mounted within open mesh flooring sections. |
|||||||
Lifting davits are often the best option for a portable solution due to their versatility. When coupled with the associated davit socket (Surface mounted, cast-in, or wall-mounted), the portable lifting davit provides a cost-effective way of lifting loads in multiple locations. This is because one davit can be moved between multiple different sockets. Not suitable for man-riding applications.
Our portable davits have a WLL (Working Load Limit) of up to 1000kg, coupled with varying height, reach and slew capabilities, and they provide a solution for most problems you could face.
If our standard products do not meet your requirements, we can also design and manufacture bespoke davits and sockets to suit your requirements (Contact us for a quotation).
See optional hoists and pump chains links below (Sold separately)
