Portable Split Pillar Lifting Davits - GB Lifting Davits - Lifting Davits - Cranes
Portable Split Pillar Lifting Davits
Key Features
- 500 kg capacity in 3 reach options
- Portable lifting davits for use with lifting hoist
- Galvanised steel to BS EN 1461 - 270 degree rotation
- Ideal for general lifting operations in multiple locations
- Choice of galvanised sockets
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Galvanised Split Pillar Steel Lifting Davits
The portable split pole davit is a 3-piece assembly manufactured from mild steel and galvanised to BS EN 1461.
With a slew of 270 degrees and a socket pin to suit the standard 65 mm dia sockets.
Also available to suit a 63.5mm diameter socket or other diameters as required (Contact us).
This davit is available with a split of either 70/30 or special 50/50 (contact us) and in a range of reaches to suit individual customer requirements. (Contact us)
Subject to customer requirements, this davit can also be supplied in stainless steel 304, stainless steel 316 or as a lightweight aluminium model.
Davit Dimensions
| Model | Capacity (kg) | Reach (A) mm | Height to suspension point mm | Rotation (Degrees) | Pin Dia. Mm | Finish |
| VSPD05760 | 500 | 760 | 2200 | 360 | 65 | Galvanised |
| VSPD051000 | 500 | 1000 | 2200 | 360 | 65 | Galvanised |
| VSPD051200 | 500 | 1200 | 2200 | 360 | 65 | Galvanised |
Socket options
| Socket Type | WLL (kg) | Base Dimensions (mm) |
To Fit Diameter Pin mm | Total depth required mm | No. Of Fixing Holes | Fixing Size | Finish |
| Surface Mount | 500 | 250 x 250 | 65 | NA | 4 | M20 | Galvanised |
| The surface mount sockets are suitable for mounting on concrete or steel structures, and a cover plate can be supplied if required. | |||||||
| Cast In | 500 | 200 dia | 65 | 350 | NA | NA | Galvanised |
| Cast-in sockets are installed into concrete when a reduced-trip hazard installation is required. A cover plate is fitted as standard. | |||||||
| Grout In | 500 | 200 dia | 65 | 350 | NA | NA | Galvanised |
| Grout-in sockets without tabs for installations into existing concrete and is fixed in place with a chemical fixing compound. | |||||||
| Wall Mount | 500 | 450(H) x 400(W) | 65 | NA | 7 | M20 | Galvanised |
|
Wall-mounted davit sockets are constructed using a mounting plate with holes to suit M20 fixings. These wall sockets can also be supplied with back plates and compression tubes for use when mounting on a twin-skin cavity wall installation. |
|||||||
| Bridge Mount | 500 | 250 x 250 | 65 | 250 | 6 | M16 | Galvanised |
|
Bridge-mounted davit sockets are Widely used in steel walkways where a flush installation is required to reduce trip hazards. This type of socket can also be flush-mounted within open mesh flooring sections. |
|||||||
| Inverted Mount | 500 | 400 x 400 | 65 | 312 | 8 | M20 | Galvanised |
|
Inverted-mounted sockets are widely used in steel walkways where a flush installation is required to reduce trip hazards. This type of socket can also be flush-mounted within open mesh flooring sections. |
|||||||
When a portable solution is required, lifting davits are often the best option due to their versatility. When coupled with the associated davit socket (Surface mounted, cast-in or wall mount, the portable lifting davit provides a cost-effective way of lifting loads in multiple locations, this is because 1 davit can be moved between multiple different sockets. Not suitable for man-riding applications.
Our portable davits have a WLL (Working Load Limit) 500 kg, couple this with varying height, reach and slew capabilities and they provide a solution for the majority of problems you could face.
If our standard products do not meet your requirements, we also have the capability to design and manufacture bespoke davits and sockets to suit your requirements (Contact us for a quotation).