Tiger Two Jaw Sliding Fixed Beam Anchor Beams - Work Positioning - Height Safety Equipment
Tiger Two Jaw Sliding Fixed Beam Anchor Beams
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Tiger Two Jaw Sliding Fixed Beam Anchor
Fixed Type Two-Jaw Sliding Horizontal Beam Use
Quick and versatile anchorage point for personal fall protection equipment CE Certified - CE 1019 Minimum Breaking Strength 22.3 kN (5,000 lb/2.27 tonnes) Capacity 140kg These units meet the requirements within EN 795:2012/B and ANSI/ASSE Z359.1-2007 We advise that structural calculations are carried out on all beams and supporting steelwork by qualified engineering departments to ensure safe operation. Range Main Features
Minimum Breaking Strength 22.3 kN (5,000 lb/2.27 tonnes)
Quick and versatile rigging point for personal fall protection equipmentEasy adjustment beam width ranges 2.5" to 24", 6.35cm to 60cmUnit weight from 1.9kg – 3.5kgThese units meet the requirements within EN 795:2012/B
Tiger Beam Anchors are used as anchorage connectors for personal fall arrest systems. They are designed to be attached to a Horizontal I-Beam. Single jaw sliding clamps can also be attached to a Vertical I-Beam. They might be used as an end termination for either a shock-absorbing lanyard or self-retracting lifeline for fall arrest, or with a positioning lanyard for fall restraint.
Certification:
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.
Download technical data sheet
Technical Data
| Description | Code | Beam Flange Size | Weight (Kg) |
| Fixed Type Two-Jaw Sliding Horizontal Beam Use |
TYAA211 | 2.5" to 12", 6.35 cm to 30.0 cm | 1.93 |
| TYAA212 | 2.5" to 18", 6.35 cm to 45.0 cm | 2.22 | |
| TYAA213 | 2.5" to 24", 6.35 cm to 60.0 cm | 2.51 |