Topal TC Load Positioner for Rope Slings - Topal Lifting Clamps, Magnets and Beams - Tractel - By Brand
Topal TC Load Positioner for Rope Slings
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
Applications
Lifting and finding the centre of gravity of out of balance loads with a rope sling.
To be used with a rope sling. In the free position, with the sling slack, the cable travels around the ring of the load positioner enabling the positioner to be moved and placed above the load’s centre of gravity. When lifting, the rope sling locks around the ring. If the load is too unbalanced, lower the load and slacken the sling to free the tension around the ring. Resume the operation until the position of the load’s centre of gravity is determined. Once this position has been found, the load can be moved.
Make sure the WLL and the sling angle are adhered to (see table). Use a cable within the diameter equal to or greater than the one indicated. Check the positioner can be assembled if the diameter greater. For any load positioning requiring more than two fastening points, use several load positioners. The effo rt distribution must not exceed 70% on one leg and 30% on the other one. Slings are not supplied, if needed contact us. Operating temperature: -20° to + 100° C.