Zeta Safety Pallet Gate For Low Beam at Platform Edge - Custom Size - Pallet Safety Gates - Pallet Handling - Material Handling
Zeta Safety Pallet Gate For Low Beam at Platform Edge - Custom Size
Zeta Safety Pallet Gate Questionnaire |
Download your Zeta pallet gate questionnaire - E-form - Complete - Save -Attach the completed questionnaire to your quotation request below - Format pdf or email to sales@dale-lifting.co.uk
Key Features
- Solves awkward low headroom problem common of many mezzanine floors
- Custom-made to suit your location
- Finish options - All galvanised or Safety yellow thermoplastic tube coating with galvanised tube clamps
- No maintenance nylon pivot bushes - No welding all parts are replaceable if damaged in use.
- In conformances with BS ISO 14122-3:2016 fall protection standard.
Delivery Information
Order online for delivery to Mainland UK VAT eligible locations only. Delivery charges will be shown in the shopping cart. Despatch dates for products can vary, if urgent, please contact us. Request a quote for postcodes DD, IV, KW, PA, AB, BT, HS, TR. PO30-PO42, southern Ireland, Channel Islands. For international destinations restrictions may apply.
Returns Policy
Simply email us at sales@dale-lifting.co.uk or call 0161 223 1990 and we will be able to give you a returns authorisation code, which must be sent with the returned item. Returns should be authorised within 14 days from the day of delivery to you. Items should be returned in unused condition & due to the nature of our products a restocking fee may apply. Unfortunately, delivery charges are not refundable. Items returned without an authorisation code may not be accepted. Normally All refunds will be processed within 7- 10 working days on receipt of returned goods.
Non-standard (Quote only, pre-order or custom-made products)
Custom made to order products are not covered by our returns policy. Please ensure when ordering all measurements and capacities are correct as we are unable to refund on these products.
For more information see https://www.dlhonline.co.uk/terms-conditions
NEW - Zeta Mezzanine Safety Pallet Gate for Locations with Low Overhead Beam or Truss at the Platform Edge.
This new model has been added to the Mezzbarriers range. It is designed to address a common problem in buildings where a mezzanine floor or work platform has been suspended from the building columns, This is usually where an overhead beam or roof truss is directly over the platform edge resulting in restricted headroom.
Innovative Design
Standard up and over pallet gates with a central pivot point between the gates have gates of the same height which compromises the headroom of both gates causing a head hazard for the operator.
By adding extra pivot points, the Zeta model can have a low edge gate and a higher inner gate to take advantage of the increased headroom behind the edge beam making a safer standing height for the operative.
Custome-Made
The Zeta safety pallet gate is custom-made to suit your location and can be made to suit standard-size single pallets or double-width for twin pallet loading or longer loads.
Of course, the pallet height is restricted by the height of the overhead beam or truss and will be approximately 550 mm less than the headroom under the beam, but by placing the pallet or load 150 mm further forward of the edge, the pallet height can be increased by approximately 300 mm, e.g. beam height 1800 mm - pallet height 1250 mm or 1550 mm at 150 mm back from the edge.
The inner gate can take advantage of the increased headroom further back usually a 2000 mm headroom will solve any head hazard issues.
| Click Here to Download ZETA Model Questionnaire to enter the dimensions needed for your no-obligation quotation |